Restoring CFD Connection

Introduction

If you're experiencing connectivity issues between your Point of Sale (POS) system and the Guest Facing Display (CFD), follow these steps to diagnose and resolve the problem.

Table of Contents

Troubleshooting Guide: Connecting CFD to POS System

Step 1: Verify CFD Connection

Verify if the CFD connection is active. If it is, you'll see the CFD Model, IP Address, and Connection Status.

Step 2: Quick Check

For a swift diagnosis, perform the following steps:

Step 3: Hard Check

For a more thorough investigation, follow these steps:

Ensure that a Bluetooth connection on both devices (POS and CFD) is established.

On POS:

a. Navigate to "Apps" via the TeamViewer screen's top navigation.

b. Return to the "Remote Control" tab.

c. Select "Connected Devices" and review Bluetooth-paired devices.

d. Rename the device to the respective Location name and device Type.

On CFD:

a. Access the Android settings through the TeamViewer screen's top navigation.

b. Return to the "Remote Control" tab on TeamViewer's top navigation.

c. Choose "Connected Devices" and review Bluetooth-paired devices.

d. Rename the device to the corresponding Location name and device Type.

After ensuring both devices are paired, double tap the CFD screen and select. Allow on the popup.

On the POS, tap "CFD Disconnected" on the status bar. Then, select the Bluetooth icon on the connection type popup.

Choose the Bluetooth CFD Device named "Location Name & Device Type" that is detected.

Once connected, a little green cloud icon with a checkmark will appear.

Test the connection by adding products to the cart and observing the CFD response.

Conclusion:

By following these steps, you can efficiently troubleshoot and establish a connection between your POS system and the Guest Facing Display (CFD). If the issue persists, please contact our support team for further assistance.

Back to top

Updated on: 08/19/2025

Share your feedback

Send My Feedback Cancel

Thank you!